Battery Chargers
DC-AC Inverter-Chargers
DC-DC Converters
Power Supplies
Power Modules & Power Function Manager
DC Power Conditioners
DC Power Stabilizers
Battery Isolators & Integrators
Automatic Power Selector
DC Power Accessories
Electrical Panels
Digital Instruments For AC/DC Systems
Metering
Electrical Panel Accessories
Waterproof Circuit Breakers
AC Source Switches
Galvanic Isolators And AC Shore Power Accessories
Terminal Strips, Connector Strips & Bus Bars
Thru-Dex Waterproof Junction Boxes
Electrical Enclosures, Cable Entries
Thru-Dex Cable Glands & Antenna Accessories
Grounding & Noise Filters
Test Equipment
Phone-Coms, Radio Covers, & Hailers
Waterproof Fittings

RA Series Right Angle Waterproof Feed-Thru Fittings RA Series Right Angle Waterproof Feed-Thru Fittings

Route cables at 90° through vertical and horizontal surfaces with wall
hugging low profile design that keeps cable secured close to the surface reducing intrusion with personnel or other equipment / cables.

Molded of nylon, the Sculpted shape has no sharp edges and provides
radiused 90° feed-thru bend in cables without damage.

Easy installation: slide silicone compression rings on cable, mount base piece with waterproof gasket then attach sealing end cap to create an IP 65 waterproof seal. Note cable must be routed without end connector attached.

Three models to accommodate wide range of cable diameters.

Model

Cable Diameter Range (Inches)

Dimensions (Inches)

RA-1

0.1 - 0.25

2.17 x 1.65 x 0.63

RA-2

0.27 - 0.35

3.23 x 2.44 x 0.95

RA-3

0.39 - 0.47

3.23 x 2.44 x 0.95

Waterproof Fittings
• Create a 100% waterproof seal when routing cables through decks and bulkhead
• allow installation and/or removal of cable with connector still attached
• Accommodate wide range of cables
• Rugged, weatherproof glass-filled nylon
• Available in two series:

CCX Series – Entry hole pre-drilled in seal with slit to edge allowing feed thru of cable with factory-installed connector attached; multiple glands cover a wide range of cable sizes; one CCX fitting required for each cable.

DC Power Onboard with Newmar’s Waterproof Fittings, RailFast Antenna Mounts, and Antenna/Coax Switches. The Waterproof fittings create a 100% waterproof seal when routing cables through decks and bulkhead. RailFast Antenna Mounts allow Quick and easy installation of antenna on 1" or 7/8" railing. Ideal for G.P.S., VHF radio, and whip antennas, has direct feed-thru hole for coax cable. Antenna/Coax Switches are a two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna for yachts, recreational crafts, live aboard, commercial, and military vessels.
 Model
 Cable Diameter Range Max Connector Diameter Typical Connector
CCX-R
 .47"-.59" 1.57" Large Radar Plug
CCX-S
 .35"-.55" .83" Small Radar Plugs
CCX-T
 .18"-.35" .83" PL-259, BNC, Wind Instrument Plugs


DX Series – Drill holes and slit cable gland as required to accommodate cable with or without factory-installed connector. Multiple cables may be passed through a single fitting.

DC Power Onboard with Newmar’s Waterproof Fittings, RailFast Antenna Mounts, and Antenna/Coax Switches. The Waterproof fittings create a 100% waterproof seal when routing cables through decks and bulkhead. RailFast Antenna Mounts allow Quick and easy installation of antenna on 1" or 7/8" railing. Ideal for G.P.S., VHF radio, and whip antennas, has direct feed-thru hole for coax cable. Antenna/Coax Switches are a two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna for yachts, recreational crafts, live aboard, commercial, and military vessels.

Model Drill Thru Aperture Max. Connector Dia.
DX-2 1.2" Diameter 1.2"
DX-3 1.65" Diameter 1.65"
DX-5* 1.65" Diameter 2.0"