Circuit Breakers
All circuit breakers offered by NEWMAR are UL recognized and CSA listed for AC and DC
systems and meet USCG requirements as a qualified circuit protection device.
Standard Series: Single and Double Pole
Fit all NEWMAR electrical panels, as well as most other brands
• Feature magnetic-hydraulic “trip-free” mechanism
• 5-30 amp rated to 65 VDC or 277 VAC; 40 and 50 amp rated to 32 VDC or 120 VAC (See rating note below).
• Mounting screws not provide order separately
• #10 screw terminals on rear for wiring
Options
• Red, white or black toggle handles
• Single pole values: 5, 10, 15, 20, 25, 30, 40 or 50 amp.
• Double pole values: 15, 20, 30 or 50 amp
Important Circuit Breaker Rating Note: Standard series breakers shown on this page which are rated
higher than 30 amps are acceptable for use in 230 VAC Line-to-Line systems (where each leg is
115 VAC - to - neutral), but are not rated for 230 VAC line-to-neutral systems.
High Amperage Series: Single Pole
|
|
 |
Rated for up to 65 VDC or 120/240 VAC service
• Feature auxiliary contacts for optional remote monitoring of circuit breaker status
• "Trip-free" mechanism
Options
• Current rating of 75 or 100 amps
• Black or white toggle
Square cut-out mounting configuration fits Elite Series Panel (manufactured 1995 or later)
DC master breaker position only.
– 1/4” studs on rear for wiring
– Two 6-32 screws required for mounting; not included w/bulk pack – order separately
– Auxiliary alarm contacts (form C)
High Current Fuses/Fuseblocks
Essential safety item for all inverter installations and other high amperage
DC circuit over-current protection.
• Heavy duty 500 amp, insulated, compact fuse block with corrosion-resistant 5/16” studs
• Secures to surface with two #10 flat head screws or bolts (not included)
• Clear lexan cover insulates conductive parts, per ABYC/USCG requirements
• Accepts industry standard ANL tin-plated copper fuses. Purchase separately.
• See-through mica element for easy identification of blown fuse
Fuseblock Model: AFB-500
Fuse Models (numeral indicates amperage): ANL-50, ANL-100, ANL-150, ANL-200, ANL-250, ANL-300, ANL-350,
ANL-400, ANL-500 (All rated to 80 VDC)
Label Sets
Ideal for custom labeling of switch or circuit breaker positions on any NEWMAR or similarly constructed
electrical panel. White lettering on black peel-and-stick mylar. Label size: 1.75" W x .5" H
Models:
LS-I Standard Set-22 Labels
LS-II Electronic Set-55 Labels
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Panel Back Enclosures
 |
Secure to the rear of many common electrical panels to protect crew against injury or panel against damage from accidental contact. Heavy duty ABS plastic. May be cut or drilled to suit wiring needs. (Intermediate mounting surface between panel and enclosure required)
|
