DC Power Onboard with Newmar’s Waterproof Fittings, RailFast Antenna Mounts, and Antenna/Coax Switches. The Waterproof fittings create a 100% waterproof seal when routing cables through decks and bulkhead. RailFast Antenna Mounts allow Quick and easy installation of antenna on 1" or 7/8" railing. Ideal for G.P.S., VHF radio, and whip antennas, has direct feed-thru hole for coax cable. Antenna/Coax Switches are a two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna

Antenna/Cable Accessories
Waterproof Fittings | RailFast Antenna Mounts | Antenna/Coax Switches

Waterproof Fittings
• Create a 100% waterproof seal when routing cables through decks and bulkhead
• allow installation and/or removal of cable with connector still attached
• Accommodate wide range of cables
• Rugged, weatherproof glass-filled nylon
• Available in two series:

CCX Series – Entry hole pre-drilled in seal with slit to edge allowing feed thru of cable with factory-installed connector attached; multiple glands cover a wide range of cable sizes; one CCX fitting required for each cable.

DC Power Onboard with Newmar’s Waterproof Fittings, RailFast Antenna Mounts, and Antenna/Coax Switches. The Waterproof fittings create a 100% waterproof seal when routing cables through decks and bulkhead. RailFast Antenna Mounts allow Quick and easy installation of antenna on 1" or 7/8" railing. Ideal for G.P.S., VHF radio, and whip antennas, has direct feed-thru hole for coax cable. Antenna/Coax Switches are a two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna for yachts, recreational crafts, live aboard, commercial, and military vessels.

Model	Cable Diameter Range	Max Connector Diameter	Typical Connector
CCX-R	.47"-.59"	1.57"	Large Radar Plug
CCX-S	.35"-.55"	.83"	Small Radar Plugs
CCX-T	.18"-.35"	.83"	PL-259, BNC, Wind Instrument Plugs

DX Series – Drill holes and slit cable gland as required to accommodate cable with or without factory-installed connector. Multiple cables may be passed through a single fitting.

Model	Drill Thru Aperture	Max. Connector Dia.
DX-2	1.2" Diameter	1.2"
DX-3	1.65" Diameter	1.65"
DX-5*	1.65" Diameter	2.0"

RailFast^® Antenna Mounts
Quick, easy installation of antenna on 1" or 7/8" railing. Ideal for G.P.S., VHF radio, and whip antennas, has direct feed-thru hole for coax cable. Ratchet surface permits 360° rotation for adjustment/lay-down. Holds antennas up to 8' (2.4 meters) in length. No drilling required; all necessary hardware provided. (US Patent #4546949)

• Model 311-N
Strong, fiberglass- filled nylon rail mount for permanent antenna installation with hex-key vertical adjustment. Smooth spherical shape won't catch lines or clothing.
• Model 311-NLH
Similar to 311-N (listed above), but has lay-down handle that permits quick, easy lay-down of antenna.

Antenna/Coax Switches

Manual
Model: CS-201
Two position switch allows manual selection of one of two antennas with a single radio or one of 2 radios with a single antenna. Die cast aluminum case.

Power: 1.5 kW peak 1 kW continuous
Impedance: 50 ohm
Connectors: S0-239/UHF
Weight: 1Lb., .5Kg.

Remote
Model: RCS
Operates on 12 VDC,
single pole, double throw. Permits remote selection of two antennas with a single radio.

Power:1Kw.
Impedance: 48 ohm
Coil Current: 250 m A
Connectors: SO-239/UHF
Weight: 1 Lb., .5 Kg.